The key to a successful build is the preparation of the area on which your wendy house will be sited. There are a lot of different opinions on this, but these are our thoughts which we hope you will find useful.
 Although our houses come with thin bearers attached to the underside of the floor boarding to lift it slightly off the ground, it would not be sufficient to seat this straight onto soil or grass, likewise a block in each corner would be far from sufficient.
 The base would ideally be the same size as the house ordered unless a walkway around was required. It would need to be at the level of the surrounding area or slightly raised to eliminate water collection. The three main methods of preparing a base being as follows:

• Concrete Base

Possibly the most expensive and permanent option. We would recommend a professional or experienced DIY person to undertake this type of base.

• Decking

This can make an interesting feature for your garden if extended beyond the floor area of the house which it will accommodate. Possibly the easiest option if the house is to be seated on an excessively sloped area.

• Slabs

Turf would need to be cut away from the area. A thin layer of sand or dry sand cement mix would be spread level into the cutting and slabs laid on top of this.The slabs could also be substituted for shingles or gravel

 It should go without saying that the solid base area should be perfectly flat and level. To ensure this an essential tool would be a spirit level, reasonably priced and readily available at all DIY stores.

 If you have specified assembly by Windmillcrafts we regret to inform customers that if a base is not to an acceptable standard, we reserve the right to refuse assembly. Charges for assembly would be deducted from the balance, and a copy of the build instruction would be supplied for self assembly. If we were required to revisit at a later date to assemble, additional travel costs would be incurred

Other important notes

 Please bear in mind access both for delivery and for the actual build process. In flat pack form these items are roughly 6/7ft square and therefore we will need access that would accommodate such. Surcharges will be made if the site of the build is not within a reasonable distance of available parking for our delivery vehicle, or if the house has to be carried up flights of steps or over neighbours’ fences to reach the site. If you are in any doubt please ask us before the delivery date.

Base footprint sizes

Standard             = 1800mm W x 1800mm D
Standard 7ft deep  = 1800mm W x 2040mm D
Standard 8ft deep  = 1800mm W x 2400mm D
Deluxe Model         = 1980mm W x 2040mm D
Deluxe 8ft deep    = 1980mm W x 2400mm D

[Home] [About Us] [Playhouses] [Gallery] [Taverner (prices)] [Windmill (prices)] [Delivery & Assembly] [On Site Preparation] [Order & Payment] [Comments] [Contact Us] [Terms & Conditions]